https://www.facebook.com/marketplace/item/2583866361786313/
Parts car anyone?
https://www.facebook.com/marketplace/item/2583866361786313/
Parts car anyone?
Honestly you only really need 3 tools to get the oil done on these cars. A wrench/socket set for the plug, a tool to get the oil filter off (I use oil filter pliers), and something to catch the oil...
OK, info dump time guys. I can't verify the accuracy of the numbers, but here's what I've got so far:
From
https://i.imgur.com/wJZ8HzK.png
43042-3AW1A
Spindle
I only get the one...
Once you factor in shipping, I find NAPA to be pretty competitive when it comes to consumables like oil filters, etc. However, if they ship from the same warehouse as the bigger parts in an order,...
The original wheels are 15x5.5 offset 50. The 42 will pull the wheels out 14mm at each corner. The 40 offset ones will pull the wheels out another 2mm out from there. It's a minimal difference,...
I don't think any of us know what the low beam thing means. Could be the grade/angle that the beam is aimed out of the housing.
When they're talking about DIY, they're referring to fixing the...
That's really not a thing we have experience with. All but a few of us have cars that use the HR16DE petrol engine.
If you bought the correct injector, the specifications shouldn't have changed,...
Make sure you clean out the area inside the fender where the door closes. Leaves and snow like to accumulate in there and freeze, which can keep the door from opening fully.
Is there anything regarding the offset? It may be stamped in there as ET### or look for a number stamped in there that's between like +35 and +55
You should be able to get the number 4 spark plug out without removing the manifold to get an idea of what kind of condition they're in. IIRC, you'll need some pliers to get some hose clamps and...
I went with NGK Iridiums. This isn't a job I feel like doing again any time soon! :p
At about 117k, my car would intermittently throw a P0420 (low catalyst efficiency), but more recently it became an ongoing issue. I was looking into working on that part of the exhaust when my friend...
https://www.mediafire.com/file/8u3ntsrmaxe6h0h/Nissan_Academy_-__K13.pdf/file
Here's a pdf of the document
Just cut off the flanges and put in a piece of pipe and some clamps. All in all, it should be less than 20 bucks of parts from Canadian Tire. A few of us have done it. Personally, I went with a...
Like the window rain guards that go on the side windows? Looks like eBay has some
Is it part number 47950-1HA0A? (Item 47950 on the far right in the diagram)
5930
Best I can find is about 100 shipped from the UAE. Lord knows how long that'll take to arrive though.
...
I'm not a huge fan of all season tires, but I see you're in Victoria. Unless it's an unusually cold winter, and things freeze over, the Kumhos would probably be more than adequate.
You'll want thinner spacers for the front. The distance to the fenders are different from front to rear by like 5-10mm.
I would imagine that the RHD countries like the UK and Japan would be a bad idea, as the wipers I think are mounted in the other direction.
My catalog tells me:
General LHD: 28886-9LH1A...
Welp. The rear studs are indeed different. The splines are smaller, and the length is different. On the plus side, you can knock them out of the drum with a regular hammer.
So which one of you guys is this?
https://i.imgur.com/f0HZoTH.jpg
https://i.imgur.com/8EfZ3Ha.jpg
And one more for MetroMPG
https://i.imgur.com/KV5E1mS.jpg
Did a bit of quick poking around. I can't guarantee that these are the correct part numbers, BUT...
For the RHD Euro market
K13K MICRA IND MAKE 07/2010-
32310-00QAG GEAR ASSY-5TH,INPUT...
The part numbers are different.
The Micra is 28710-1HA0A
The Versa note is 28710-3WC0A
If you look them up, you'll find they're also shaped differently.