Originally Posted by
Anonymous
New engine has been successfully installed, happy and knock free.. New engine is *HR16*885216 H.
Makes me wonder if its 70 series engines that are prone to the issue.
I would like to say that I am very happy with Nissan's response to the issue. It was a fast as possble, and done quickly. I appriciate them standing behind the product they have made..
If anyone is having a similar issue, I reccomend using my info on it. PM me if you need some assistance. Here is some data that might help:
COMPLAINT: CONCERN OF ENGINE KNOCK FROM 16-2100 RPM'S NISSAN CANADA REF #3879549 (CSI)
CAUSE: ROAD TEST TO DUPLICATE NOISE - SCOPE NOISE TO DETERMINE SOUND IS BOTTOM END NOISE - CALLED TECH LINE TO GET APPROVAL TO REPLACE ENGINE
CORRECTION: REPLACE ENGINE ASSY & TRANSFER PARTS AS NECESSARY
PARTS-----QTY------FP-NUMBER-------------------DESCRIPTION
JOB 2 1 10102-3VA1A BARE ENGINE
JOB 2 1 14035-1HK0A GASKET
JOB 2 1 14036-1KT0A GASKET
JOB 2 1 11001-JK70A BLOCK HEATER
JOB 2 1 15066-3HC1A GASKET
JOB 2 1 32 - 50 #20 CLAMP
JOB 2 1 15208-65F0E FILTER, OIL
JOB 2 1 11062-1KT0A GASKET
JOB 2 1 21014-ED000 GASKET
JOB 2 2 99998-E105934 MS1000 5W 30
JOB 2 2 99990-ENGBLUE ANTIFREEZE
HOURS: 9.20 1 TECH
So with that I hope that info above could help as a baseline if some modder wants to replace their engine in the future. Or at least the block heater PN. I think the CSI number is when I called into Nissan Canada About it. But I figure if enough people call in about it and steer at the same direction, then eventually, it may become a tsb or something.
So your new engine ends with "H"? Or "J" ?
__________________________________________
View my fuel log 2015 Micra S manual: 7.7 L/100 km ... 36.8 mpg (Imp) ... 13.0 km/L ... 30.6 mpg (US) ...