Originally Posted by
manuel ugalde
well as i told you when i introduce my self in the forum i'm looking for the correct way to install al 4 calipers & disc brakes from a 300zx z32 on my car.
Today i had some time to inspect the knuckle and OEM brakes and i discover that the caliper is direct bolt on on the mounting points of the OEM!.
now i just have to find the correct way to center the disc on the caliper (going to check clio sport rs disc for correct diameter and y hope the center may be align with the caliper) or i will have to us a spacer & longer bolts on the hubs
After installing fr brakes i will move to the rr brakes to destroy my brain dealing with ideas to install calipers instead of drums.
i hope this info help you guys.
best regards.
So you need to move the rotor about 5mm?
Could you not just offset the caliper with a spacer instead of the rotors?
Oops, iguess not
__________________________________________
View my fuel log 2015 Micra S manual: 7.7 L/100 km ... 36.8 mpg (Imp) ... 13.0 km/L ... 30.6 mpg (US) ...