Welcome to the forum, Azmodon.
AM transmission = automatic?
April 5 2021 - Currently being turned into a cube, but she was a fun little gokart
Spring 2019 - "The List"
Brake Fluid
Measure / Design / Build - Rear Swaybar
*** I really need to update these images lol
Things that have been done:
- Partial grill block
- In-Channel Window deflectors
- March Badges (trunk / doors)
- Nismo Badges (grill / doors / trunk)
- Splitter - Steel reinforced + frame mounted
- AMB style "Infinity Wings" - CDF'd and 3D printed + epoxy filled (with blue / purple tempered steel rock guards)
- Rear tray / diffuser (designed and built)
- 3D printed rear wheel well vents
- Rawtek Micra-Cup Cat-Back Exhaust
- Yonaka 2.5" Race-Cat
- 3" Fiberglass Fender Flares (thanks Russia)
- Custom stainless side skirts I designed
- Morimoto Laser Projectors + switchback strips + demon eyes
- Custom Fender liners
- Sealed front corner ducts
- Omp tow strap
- SR style spoiler
- Plasti-dipped Face and C-Pillar (can't go wrong at $4.50/can)
Images will be all over the place
So Far:
- Matte blacked all beige plastic on A/B/C pillars
- Matte blacked headliner and all vinyl accessories
- 900W 12" Sub - using Alpine LOC hooked to right rear door
- Butyl rubber sound insulation on entire floor and wheel wells
- air pocket (bubble wrap style) film applied to entire trunk
- 'replica' Cascade Audio VB-3 fabricated and installed on all doors
- Hardwired front / rear dashcams
- new interior speakers for the doors
- cabin filter (missing stock)
- Tanabe Strut Brace
- Injen intake
- New accessories belt
- Hella Horns
- Denso 4711 spark plugs
- Come spring -
Poly reinforced motor mounts
ATE TYP200 race brake fluid
- TEIN fully adjustable coil-overs
- Eibach Camber Bolts
- Custom moulded spring retainers for the rear - swapped out Tein 224lbs/in for 600lbs/in Hypercoils + helper springs (ride height now 4")
- Custom Stainless Swaybar Mounts
- JNC 004 rims, 17x8.5 @+25 offset (much poke)
- Centre caps removed
- Extended forged steel lug nuts
- 225/45-R17 Firestone Indy 500's
- BrakePerformance drilled and slotted rotors + Wagner Pure ceramic pads (was 132'000 km in and the stock pads weren't even half way through the centre groove lol)
Welcome to the forum, Azmodon.
AM transmission = automatic?
__________________________________________
View my fuel log 2015 Micra S manual: 5.0 L/100 km ... 56.5 mpg (Imp) ... 20.0 km/L ... 47.0 mpg (US) ...
lol talk about a massive delay, I never thought to scroll down the page :P yes it's the automatic. I bought the car specifically because of its price because I was flat broke at the time due to my insurance policy failing me (totalled my Mazda3 and owed like 8K). This is the result, and now that I'm back on even footing I'm throwing about 3K at it this summer. I figure if I'm going to drive this for the next 5+ years, given how many of them I see in Niagara Falls, it should stand out
__________________________________________
View my fuel log 2015 Micra SV automatic: 7.1 L/100 km ... 39.9 mpg (Imp) ... 14.1 km/L ... 33.3 mpg (US) ...
Interesting fitment on the wheels..Did you end up spec'ing the TEINs with the sway-bar link tabs on them?
No I've got the tabless ones, but getting the metal and cutting / bending it to shape will be a weekend job come spring - I've put in the Eibach "camber bolts" (long and thin) - so adding a bracket isn't going to run out of threads.
The fitment is... yeah, interesting lol. I wanted 17x7.5 - but apparently no one buys those, and I didn't feel like paying 1K for rims, so I got the 17x8.5 for ~650 since they came with tires... which would've been a deal had the rubber not been gouged internally when the guy had them installed.
As it sits I'm getting flares and installing 3X stiffer springs in the rear (I've got an album showing the mount I made), the camber and a healthy roll of the front now has that all sorted, hard corners just have them tuck inside. The issue is all passenger load goes straight to the rear, and the design of the rear suspension means the tires moves forward as it moves up, so currently if I get heavy enough the tire rubs the fender at 45 degrees forward from the hub. The stiffer springs will fix that on its own but I don't want to add camber to the rear so flares will cover the tread and handle any surprise pot holes.
stock height - new height at highest setting - side view of rear wheel at that high setting.
http://imgur.com/a/oXTPX
Last edited by Azmodon; 02-10-2017 at 05:14 PM.
__________________________________________
View my fuel log 2015 Micra SV automatic: 7.1 L/100 km ... 39.9 mpg (Imp) ... 14.1 km/L ... 33.3 mpg (US) ...
Haha 17s wow...if you spec'd your Tein's with the basic standard march you won't get any tabs with them, only the Nismo S March comes with sway bars, so the Flex-Z series come with tabs.
The picture bellow shows them equipped to a K13.
Last edited by Nobuseri; 02-10-2017 at 06:27 PM.