There is not much in the way of space in there.. I had mine open a few weeks ago. I didn't pay too much attention to the removal of the fuses but it sure didn't look like it would be easy.. There may...
Type: Posts; User: Bobaganousch
There is not much in the way of space in there.. I had mine open a few weeks ago. I didn't pay too much attention to the removal of the fuses but it sure didn't look like it would be easy.. There may...
Space saver 20
Space saver 19
Space saver 18
Space saver 17
Space saver 16
Space saver 15
Space saver 14
Space saver 13
Space saver 12
Space saver 11
Space saver 10
Space saver 9
Space saver 8
Space saver 7
Space saver 6
Space saver 5
Time to start on the glovebox!
Open your glovebox and the door bottom has to pull off. It pulls towards you if you are sitting in the passenger seat and a little bit up. This is another scenario...
Next up on the list of parts to remove is the A pillar trims! Wow I think that these little green connectors are the toughest part of this entire job. The first part of removal is straight forward....
Starting on the steering wheel.
There was a bit of a write up here that was helpful:
https://micra-forum.com/showthread.php/2042-Your-how-to-remove-your-steering-wheel-emblem-guide
That is what...
Starting on the interior removal.
First thing is to pop the shift knob off or make sure the faux leather boot elastic is stretched over top of the knob. (These aren't threaded and I pulled it off...
Starting out with this project requires you to ensure that you have enough space around the vehicle for access. Both doors must be capable of fully opening and you are going to need approximately 4...
This may take a few days to get all out and organized. So feel free to check back. For now I have to go help a neighbor move a piano haha
Hello everyone,
I went for a drive to beautiful B.C. down highway 93 last December. As it turns out it was below zero on the day that we were headed out. When attempting to turn up the heat in our...
It sure seems like it. When I traced the wires, there were only two hooked up. They are very small about 18AWG, only attach to the outer most pins on the connector and run back into the main wiring...