Jimmicra68 - have you started driving the Micra yet?
Fog light, chrome door handle finisher, mud flap, tailgate handle painted, radiator srceen added, rust protection, led dome light, plastic protection around filler gas tube , 14 " rims and snow tires, black out white trim a round doors
Cabine air filter , armrest , led map light
Ram air ...being manufactured...here you go!
14'' rim with 175/70/14 kumho snow tire
Jimmicra68 - have you started driving the Micra yet?
__________________________________________
View my fuel log 2015 Micra S manual: 5.0 L/100 km ... 56.5 mpg (Imp) ... 20.0 km/L ... 47.0 mpg (US) ...
Hi Graham18ce,
I bought on ebay for around 100$. For the installation you have to remove the inner fender in order to install them. For the wiring I connected them on the parking light with the relay that came with it. So I can turn them on alone and with my high and low beam. The disadvantage is that they are always on with my other headlight but its ok with me.
No not yet...but will be starting July 1st. Have to return my lease back before.
hi please send me a pic instalation Hitch.
and fog light. thx
Nissan Micra SV Krom Edition 2015.
Dodge Grand Caravan SXT 2013.
Yamaha Rhino 700 Sport Edition 2011.
Hi Doomfis, here are two pics of fog light . Hitch not purchase yet.
Not sure if the picture of the hitch is going to show up but it was an easy 4 bolt installation.
Do have a question though, the rear light plugs on a Versa or Sentra the same as the Micra? Looking for a trailer harness for the Micra?
MetroMPG (07-26-2015)
Thanks for posting, FSJ. What brand is that?
I'm not sure about the Versa/Note lights.
__________________________________________
View my fuel log 2015 Micra S manual: 5.0 L/100 km ... 56.5 mpg (Imp) ... 20.0 km/L ... 47.0 mpg (US) ...
This is one of the Hitches from Quebec, here's the link. http://www.srgattacheremorque.com/?lang=en& It attaches to your rear tow hook, two existing plugged holes in your trunk and an existing hole in the bulkhead just aft of your muffler( nut has a wire attached to it to feed in under your bumper cover. You have to remove your jack and tool in the trunk and that's it!! easy peasy!!