Results 1 to 2 of 2

Thread: Lifting the micra

  1. #1
    Join Date
    May 2020
    montreal quebec
    Thanked 7 Times in 6 Posts

    Lifting the micra

    I am in the process of lifting my micra, I want to just post it here incase anyone wants to do the same.

    I am using coil springs from a 350z front and rear.

    The rear is installed, I had to postpone the front for now. I plan to do it by january the latest but we will see. I will update as I go.

    First step was to find the springs, find the spring mounts and to extend the shock I made shock extenders.

    The rear is pretty simple, what you will have to do is lifting the rear off the ground completely remove the shocks, the springs should pretty well fall out at this point. Next step is to remove the upper rubber mount that the micra has if it didnt fall out already and add in the 350z top rubber and springs. lower the car back down and get ready to install the shocks with the extensions.

    The fronts I assume will be the same essentially, Remove strut, take apart, reassemble with 350z springs, extende the shock somehow, and remount. As I go I will post pictures.

    I have some pictures but i will attach in a couple of days.

    In the rear I have about 3" of lift.
    The front I plan to be around 2.5" of lift. we will see if the calculations are correct in the near future.

  2. #2
    Senior Member MrMicra2015's Avatar
    Join Date
    Aug 2016
    Vancouver BC
    Thanked 160 Times in 129 Posts
    micra member is squamish just did this...u2 need to connect!

    2015 Micra S (manual)
    no A/C /no power options/ block heater/4x 2 Ohm speakers...all factory stock in 2015
    Feb 2015 build
    9,999 purchase price + additional 1600$ because it was a 2015 purchased in 2016
    so receipt says $8,399....+1600 .... so they look good i guess...for a brand new car!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts