Results 1 to 4 of 4

Thread: Replacing Front left side (passenger Headlamp)

  1. #1
    Junior Member
    Join Date
    Nov 2023
    Location
    Dublin, Ireland
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Replacing Front left side (passenger Headlamp)

    I damaged the front left passenger side headlight.( I drive in Europe on left side.)
    One of the mountings has broken and I need to remove the lamp and replace it.
    I cannot find anything to help me out on how to do this.
    Does anyone know if there is a body manual to carry this work out.
    cheers Don3030



  2. #2
    Senior Member MrMicra2015's Avatar
    Join Date
    Aug 2016
    Location
    Vancouver BC
    Posts
    873
    Thanks
    220
    Thanked 147 Times in 118 Posts
    i think i remember someone FIXING the tab, or thinking about it because the top one broke.

    Remove front bumper fascia. Refer to EXT-14, "Removal and Installation".
    2. Remove the headlamp mounting bolts.
    3. Pull out the headlamp assembly forward the vehicle.
    4. Disconnect the connectors, and then remove headlamp assembly.


    it looks like a buncha work,id glue

    manuals on internets ,nissan versa similar
    2015 Micra S (manual)
    no A/C /no power options/ block heater/4x 2 Ohm speakers...all factory stock in 2015
    Feb 2015 build
    9,999 purchase price + tax..no additional 1600$ because it was a 2015 purchased in 2016
    so receipt says $8,399....+1600 .... so they look good i guess...for a brand new car!

  3. The Following User Says Thank You to MrMicra2015 For This Useful Post:

    MetroMPG (11-22-2023)

  4. #3
    Junior Member
    Join Date
    Nov 2023
    Location
    Dublin, Ireland
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Hi is there a visual step by step guide to do this

  5. #4
    Senior Member MrMicra2015's Avatar
    Join Date
    Aug 2016
    Location
    Vancouver BC
    Posts
    873
    Thanks
    220
    Thanked 147 Times in 118 Posts
    Quote Originally Posted by Don3030 View Post
    Hi is there a visual step by step guide to do this
    sort of but i think this manuals one Gen behind i had this bookmarked but
    DOWNLOAD AT OWN RISK
    DOWNLOAD AT OWN RISK
    DOWNLOAD AT OWN RISK
    https://zinref.ru/avtomobili/Nissan/...NGLISH/000.htm

    i think i can condense the manual
    -remove front bumper cover removing the 20 screws visible and the 10 it will take 1 hour to find
    -remove 4 screws securing headlight
    -installation reverse of removal





    REMOVAL
    CAUTION:
    Bumper fascia is made of resin. Never apply strong force to it, and be careful to prevent contact with
    oil.
    1. Bumper reinforcement 2. Bumper energy absorber 3. Bumper reinforcement lower
    4. Front grille 5. Front fog lamp bracket RH 6. Bumper side bracket RH
    7. Grommet 8. Bumper fascia assembly 9. Bumper bracket cover
    10. Spring nut 11. Front fog lamp bracket LH 12. Bumper side bracket LH
    JMKIA5384ZZ
    EXT-12
    < REMOVAL AND INSTALLATION >
    FRONT BUMPER
    1. Fully open hood assembly.
    2. Remove fender protector fixing clips and screws to access bumper fascia assembly fixing screw, and then
    remove bumper fascia assembly fixing screws (LH/RH).
    3. Remove bumper fascia assembly lower side fixing clips.
    4. Pull bumper fascia assembly side toward the vehicle side as
    shown by the arrows in the figure, and then disengage bumper
    fascia assembly from bumper side brackets (LH/RH).
    CAUTION:
    When removing bumper fascia, 2 workers are required so
    as to prevent it from dropping.
    5. Disconnect front fog lamp harness connectors (LH/RH).
    6. Remove bumper fascia assembly.
    CAUTION:
    When removing bumper fascia, 2 workers are required so as to prevent it from dropping.
    7. Remove the following parts after removing bumper fascia.
    • License plate bracket
    • Front bumper side brackets (LH/RH)
    • Fog lamps (LH/RH). Refer to XX-XX, "*****".
    • Front grille
    8. Remove bumper energy absorber.
    9. Remove mounting nuts, and then bumper reinforcement.
    INSTALLATION
    Note the following item, and then install in the reverse order of removal.
    NOTE:
    After installing, perform fitting adjustment.


    Last edited by MrMicra2015; 11-22-2023 at 11:36 PM.
    2015 Micra S (manual)
    no A/C /no power options/ block heater/4x 2 Ohm speakers...all factory stock in 2015
    Feb 2015 build
    9,999 purchase price + tax..no additional 1600$ because it was a 2015 purchased in 2016
    so receipt says $8,399....+1600 .... so they look good i guess...for a brand new car!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •