Results 1 to 8 of 8

Thread: 60,000 KM Front Brake Job

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member
    Join Date
    Jan 2017
    Location
    Coquitlam BC
    Posts
    120
    Thanks
    0
    Thanked 70 Times in 42 Posts

    60,000 KM Front Brake Job

    My 2016 Micra just hit 60,000 kms & on my last oil change/service visit it was noted my front brake pads
    were down to 3 mm & rotors are rusty. I didn't know this until watching a youtube video that those grooves in the
    center of the pad indicate wear, I think the groove indicates 2mm left when its' gone.
    I did my own inspection & found the outer passenger side was @ 3mm the rest closer to 5mm.
    I has also noticed a bit of grinding noise & "grabby" when coming to a complete stop so decided to replace.
    I checked Canadian tire & a single coated rotor was about 73$ each (not on sale)
    RockAuto has been mentioned on this forum so I checked it out.
    They only had the economy non-coated rotor kit & ceramic pads for 40$!
    Seemed too good to be true, turns out US $ & shipping extra.
    I selected the coated rotors kit & it only took a few days to be available
    Total price to BC with taxes & shipping 98$ Canadian.
    Id say the install went well as the rotors were not rusted to the hubs.
    The inner surface of each rotor had uneven wear pattern/rings possibly caused by the rust cutting away the pad.
    Braking is excellent & smooth now.
    It should mentioned the dealer quoted around 500$ for the same service.
    I already had the copper anti-seize compound & brake grease which is not cheap but should be used.
    Attached Images Attached Images      

  2. The Following 2 Users Say Thank You to jimwilly For This Useful Post:

    MetroMPG (06-30-2021),Parmejohn (05-20-2021)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •