Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: Transmission cooling line

  1. #11
    Junior Member
    Join Date
    Mar 2017
    Location
    Canada
    Posts
    25
    Thanks
    0
    Thanked 4 Times in 2 Posts
    I'm going to take it to a transmission shop, that's for the advice.....fingers crossed



  2. #12
    Junior Member
    Join Date
    Aug 2020
    Location
    Canada
    Posts
    29
    Thanks
    0
    Thanked 7 Times in 6 Posts
    While in the automatic transmission thread does anyone want a video of how to change transmission fluid? Dealers are charging 390-420$ plus tax for this job. Without filter change i.e. partial double fluid changes.

    Im getting close to 51k will do it most likely in december-january.

  3. #13
    Junior Member
    Join Date
    Nov 2020
    Location
    Ontario
    Country
    It drives
    Posts
    14
    Thanks
    0
    Thanked 7 Times in 5 Posts
    Changing the transmission fluid is tricky because unless you do a full fluid exchange or flush (which is not an easy DIY task) you wonít get all of the fluid even after multiple drain and fills.

    Iím a big believer in doing a flush/fluid exchange at the dealership where they use OEM fluid. Itís one of the isolated times were I recommend service work at the dealership. IMO saving a small amount of money isnít worth the cost of a replacement transmission.
    Last edited by JOEMAMA; 11-09-2020 at 11:26 AM.

  4. #14
    Junior Member
    Join Date
    Aug 2020
    Location
    Canada
    Posts
    29
    Thanks
    0
    Thanked 7 Times in 6 Posts
    I am sure you havent been in dealership while they are changing fluid in jf414e . I wrote here that i have buddies working in nissan and chrysler dealerships as mechanics, foreman. Thats exactly what they are doing as per service manual. Partial fluid change with drain and refill. No filter change no machine hooked up. Thats why labour time is too high. Its 2 hrs.

    And oem fluid you can buy in any nissan dealership. Its matic-s as per now.

    For full fluid exchange or flush is not required not by nissan and not by kia/hyundai. Unless overhaul is required then its totally different story.

    Im not taking this information from the air around me myself im engine mechanic working 8hrs a day for 15years on engines and transmissions once a month at least.
    Last edited by Plutus; 11-09-2020 at 10:48 AM.

  5. #15
    Junior Member
    Join Date
    Nov 2020
    Location
    Ontario
    Country
    It drives
    Posts
    14
    Thanks
    0
    Thanked 7 Times in 5 Posts
    Where Iím from most reputable dealers use a flush/exchanger machine for a whole fluid exchange (flushes are becoming less and less common). Depending on the vehicle, some manufacturers recommend not changing the filter.

    I have a 2015 Mazda CX-5 that has been serviced this way and it currently has 330,000km and it still drives like new. Any vehicle Iíve owned Iíve serviced this way. Mazda actually does not recommend changing the transmission fluid (they call it a lifetime fluid) though I donít believe that to be possible.

    There is nothing wrong with drain and fills - itís just not efficient from a fluid or time perspective. If a dealer has the proper equipment, a full fluid exchange is always better, regardless of what the manufacturer suggests. The main reason manufacturers recommend drain and fills is because if a machine is connected and improperly used, it can cause long term damage to the transmission.

    If you know mechanics that work at various dealerships Iím sure one of them could help you with a transmission drain and fill. Itís not a complicated process and varies very little from car to car. Iím not a mechanic by any means but I do have a shop with a lift and just replaced a transmission in a friends F-150 complete with a new filter and pan gasket.

  6. #16
    Senior Member
    Join Date
    Aug 2015
    Location
    Ottawa, ON
    Posts
    178
    Thanks
    4
    Thanked 43 Times in 28 Posts
    If you got a video, post it up please as I will be doing this soon. 62k in.

    I'm just wondering if one can use that transmission cooling line to do a flush?
    Correct me if I'm wrong here... I'm pretty sure that top cooling line is pumping out from the torque converter.
    And as far as I know, that transmission dip stick tube is a full indicator when the fluid reaches the top. I'm also assuming the level will go down when idling in park.

        __________________________________________

        click to view fuel log View my fuel log 2015 Micra SV automatic: 10.0 L/100 km ... 28.4 mpg (Imp) ... 10.0 km/L ... 23.6 mpg (US) ...


  7. #17
    Junior Member
    Join Date
    Aug 2020
    Location
    Canada
    Posts
    29
    Thanks
    0
    Thanked 7 Times in 6 Posts
    Will do it in december - january most likely december. Will record everything from start to finish. And also wont take it to the shop with hydro lifter will do in my own garage with handy tools no special ones for others to get an idea if the job is ok for them to start and do or take it to the dealer.
    Last edited by Plutus; 11-13-2020 at 03:09 PM.

  8. #18
    Senior Member MrMicra2015's Avatar
    Join Date
    Aug 2016
    Location
    Vancouver BC
    Posts
    574
    Thanks
    123
    Thanked 76 Times in 62 Posts
    bummer...wonder how old speg made out ?


    2015 Micra S (manual)
    no A/C /no power options
    Feb 2015 build
    9,999 purchase price + tax..no additional 1600$ because it was a 2015 purchased in 2016
    so receipt says $8,399....+1600 .... so they look good i guess...for a brand new car!

    Covid 19...she up on blocks!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •