Results 1 to 4 of 4

Thread: Exhaust options in 2020?

  1. #1
    Junior Member
    Join Date
    Sep 2020
    Location
    Ontario
    Posts
    1
    Garage empty: add car
    Thanks
    0
    Thanked 2 Times in 1 Post

    Exhaust options in 2020?

    I'm here on behalf of my wife's 2016 SV. I've read through every thread I can about exhausts on this forum and I'm still not sure what the best answer is.

    Over the past week the muffler popped right off the exhaust flange where it connects to the midpipe. My mechanic took a look and says I probably need a new muffler, and there's no aftermarket mufflers so it'll have to come from the dealer. He can clamp in some kind of pipe over top temporarily, but it won't last very long. Additionally, as far as I could see under the car it looks like the flange has rusted together, so I don't know if the flange from the midpipe could be used again, either:
    Name:  IMG_20200911_165008.jpg
Views: 73
Size:  83.8 KB
    Name:  IMG_20200911_164922.jpg
Views: 70
Size:  92.4 KB
    Name:  IMG_20200911_164857.jpg
Views: 69
Size:  76.1 KB

    Other than band-aid fixing it, it looks like my options are OEM ($380 + tax for the muffler, gasket and bolts... didn't even ask about the midpipe), one of the various japanese websites that will get some kind of stainless steel exhausts to me in Ontario for ~$1200, or custom work (and I wouldn't know where to start).

    As a possible option, does anyone know if any of the versa or versa note exhaust parts would fit on the micra? There's a lot of aftermarket stuff for it and the pictures look like they'd fit. I could get the muffler, midpipe, gasket and bolts shipped to me for about $390 + tax which is a heck of a lot better than OEM.

    Name:  58559_T__ra_p.jpg
Views: 69
Size:  12.6 KB
    Name:  50012_T__ra_p.jpg
Views: 69
Size:  14.2 KB



  2. The Following 2 Users Say Thank You to rustypipes For This Useful Post:

    MrMicra2015 (09-15-2020),Vaszya (09-17-2020)

  3. #2
    Senior Member MrMicra2015's Avatar
    Join Date
    Aug 2016
    Location
    Vancouver BC
    Posts
    523
    Thanks
    98
    Thanked 73 Times in 60 Posts
    a few people have noticed that joint can be quite weak...MY advice would be to literally "band aid it" BUT....your mechanic (maybe) or anyone with a welder (any welder...even a cheap one) should be able to weld a pipe and eliminate the weak bolted connection..this could be YOUR opportunity to buy that flux core welder at princess auto you always dreamed of.....so im a BAD welded with alot of experience (lol) and i welded up the hole in the 99 civic pipe....just make sure ground clamp close to weld....IDEALLY drop the pipe from the block...weld (ground clamp) and re-attach...the plan is not to allow the current from the ground clamp to go through a very fine wire ie the ECU


    on further reflection,i would take your mechanics advice, clamp a big band aid over the super weak area,an it and the rest of the system should last another 7 years


    good pics!!
    2015 Micra S (manual)
    no A/C /no power options
    Feb 2015 build
    9,999 purchase price + tax..no additional 1600$ because it was a 2015 purchased in 2016
    so receipt says $8,399....+1600 .... so they look good i guess...for a brand new car!

    Covid 19...she up on blocks!!!

  4. The Following User Says Thank You to MrMicra2015 For This Useful Post:

    Vaszya (09-17-2020)

  5. #3
    Member
    Join Date
    Nov 2018
    Location
    Kitchener
    Posts
    87
    Thanks
    9
    Thanked 27 Times in 22 Posts
    I had the exact same issue 2 years ago on my 2015. I cut out the flanged section with a cut-off wheel on my grinder and got a short exhaust pipe section at Canadian Tire with the same ID as the original pipes OD. Clamp it on either side with muffler clamps. That was 2 years ago and I expect it to last at least as long as the original flange did which is definitely a weak spot in the exhaust. Total cost was about $10 and took about 1/2 hr to do in the driveway.

  6. The Following User Says Thank You to Richard For This Useful Post:

    Vaszya (09-17-2020)

  7. #4
    Member
    Join Date
    Feb 2019
    Location
    Ontario
    Posts
    47
    Thanks
    7
    Thanked 7 Times in 6 Posts
    I did the same as Richard, but I used a reducer that fit over one side, and into the other pipe. Wasn't especially difficult. Just cut off the entire flanged area. If the one side is rusted apart, the other side won't be too far behind.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •