Results 1 to 2 of 2

Thread: PAC SWI-RC Wiring for Steering Wheel Controls

  1. #1
    Senior Member
    Join Date
    Sep 2016
    Location
    Yukon
    Posts
    220
    Thanks
    0
    Thanked 51 Times in 38 Posts

    PAC SWI-RC Wiring for Steering Wheel Controls

    Anyone successfully install the PAC SWI-RC?

    There's no Versa Note listed anywhere. I was between the Cube 2013 wiring and Versa 2014.
    The Cube has the same bluetooth module location but the 2014 Versa is much closer to the Micra interior.

    I ended up using the Versa wiring and cannot get it to program. The interface only turns on when my new deck (Sony) is requesting a bluetooth device.


    PAC SWI-RC Versa 2014 Notes:

    Nissan08
    - Pin16 PURPLE vehicle connector -> 150ohm to WHITE interface (in this case WHITE/RED since it has 150ohm wired in)
    - Pin6 BROWN vehicle connector -> WHITE interface
    - Pin15 GREY vehicle connector -> Chassis ground (blue power antenna wire on radio harness is chassis ground)

    Nissan32BT
    - Pin14 GREEN -> pin19 GREY
    - Pin14 PINK -> pin18 PURPLE
    - Pin12 WHITE -> pin17 BROWN



  2. #2
    Senior Member
    Join Date
    Sep 2016
    Location
    Yukon
    Posts
    220
    Thanks
    0
    Thanked 51 Times in 38 Posts
    So it turns out I overlooked something very simple.

    I used the red wire on the Nissan08 harness without checking first. The blue wire (pin7) is actually 12v acc.
    Pretty easy to spot if you just trace it from the Metra 12v acc..

    The SWI-RC now functions, is programmed to vehicle setting 3. However, it's not detecting input from the steering wheel.

    I triple checked that the wires used matches the notes for the Versa 2014.

    The pinouts are the same number wise (just not color) on the Nissan08 and Nissan32BT harnesses for the Cube, Sentra and Versa.
    So I shouldn't have to rewire it completely. Going to triple check all of the connections.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •