Quote Originally Posted by Daox View Post
Woohoo, glad to see everything fit up great and that its working with no CEL. Thanks for testing Spacewolf!

As for the splitting issue, that should be an easy fix. In order to keep the print time down, I decreased the density of the part. This speeds up printing, but reduces part strength. I will simply increase the part density and give that a try. I would rather not use metal inserts as more handling time will increase the part cost. The other MAF housing I make has never had an issue with splitting and does not use inserts. If worst comes to worst of course I can do it. It will just increase the cost.

I will print up another one and send it off to you to try out.
Awesome Daox! You're the man! I'm loving the current setup. Just picked out and ordered a catch can to add to it as per IMPUL's suggestion. Still trying to do up a passable 3D model for a better inlet to go across the rad support.

It really wants to break free from a stop I particularly notice it from 1k-3k where the tune may have bogged under certain acceleration conditions before but it's much eager to wind up/out now.