Printable View
I've been trying to install a sub and new head unit into my 2017 for a while now I ordered a scosche nn06b but the plug for the speaker does not work I would just wiring them normally but my car didn't come with an owner's manual I'm looking for the wiring diagram for the pp-3442c
You'll need to be more clear/descriptive on what you're trying to do (and with what) to get the answers you're looking for.Quote:
Originally Posted by Darts
- Which aftermarket head unit?
- Which sub/amp?
- How is it currently wired?
- What does 'wire them normally' mean?
- Which speaker(s) doesn't/don't work?
- What do you want to end up with?
The factory PP-3442C base deck doesn't have pre-outs (RCA's) on it like the Scosche NN06B adapter you have which is for a different higher-end Nissan deck not available on the Micra.
Your aftermarket deck should have it's own pre-outs built into it on the back which don't run through the factory harness at all.
Here's the correct harness adapter for K13 Micra headunits (same as Versa Note) at Crutchfield Canada.
K13 Workshop manual:
https://micra-forum.com/showthread.p...with-DRL-info)
Bunch of info on installing aftermaket gear in the Micra:
https://micra-forum.com/showthread.p...wheel-controls
There's also more information in the A/V section of the forum if you do a search and look around.
Cheers. :cool:
- Top pic: Audio connector pin out screen grab from workshop manual 'audio visual navigation' section page AV-48 - Pin 20 is Ground (black), but I think it's recommended to ground to chassis instead on the Micra.
- Bottom pic: Metra 70-7552 harness adapter
Attachment 5620
Attachment 5621
Update I ordered the wiring harness you recommend and got mostly everything installed tonight I will add photos to the thread soon thank you so much ❤️
Happy to help! Glad you're getting it worked out. :cool:Quote:
Originally Posted by Darts
Top pic: Audio connector pin out screen grab from workshop manual 'audio visual navigation' section page AV-48 - Pin 20 is Ground (black), but I think it's recommended to ground to chassis instead on the Micra.
in the workshop manual, am i looking at the plug as it plugs into the radio (flat face on) or the BACK of the harness where the actual colored wires are...or something else ?
does "h/s" mean harness side ?
help,i literally soldered in both ways and im still lost...PS i havent plugged ANYTHING to car.
i dont understand what im looking at in the factory service manual....the plug, the BACK of the plug, or maybe the back of the radio ?
ive heard to ground to chassis also and plan too.
Quote:
Originally Posted by MrMicra2015
bump...to the most noobish question on the planet