New update ... Attachment 4328Attachment 4329Attachment 4330Attachment 4331
Printable View
New update ... Attachment 4328Attachment 4329Attachment 4330Attachment 4331
and in the car ...Attachment 4332Attachment 4333
its how you pass the power wire through the firewall (or other way?) i am most interested in.
i was able to easily "tuck" wire from passenger footwell to rear bumper without removing anything if that helps a bit (for a rearview camera)
PS
im not sure if the speaker acoustically is going to want the vented cover you put over it, you may want to try it without that, basically you put the speaker between 2 sealed boxes....:)
I probably pass wire this or maybe next weekend so i check best place ....
for rear camera and all other, have harness (cut nothing just plug and play and solder)
And for the sub i'm in the sealed spec for that sub (Pioneer TS-SWX2502 10” Loaded Shallow-Mount). i have the sealed box too and exactly the same if i put it face down. I see supose play best face down produce better sound... if not 6 screws and it remove lol
like this Attachment 4334
new Updates:
-APPS2Car Parking Brake Bypass Video
-Metra 70-7552 Radio Wiring Harness For Nissan 2007-Up
-Metra AX-NISUSB-2 USB Retention Harness 10-Up = Nissan FOR KEEP STOCK USB PORT
-Axxess AX-NIS32SWC-6V Backup Camera = Backup cam stock work with :)
-Metra Electronics 40-NI12 Antenna Cable = For radio
Maestro RR work for vol +,- for the rest have to swap 3 wired in Bluetooth module to confirm really work for mic and other steering wheel controle
Attachment 4343Attachment 4344Attachment 4345Attachment 4346Attachment 4347Attachment 4348
i find this plug right to hood cable(inside). outside it located in inner top plastic of the driver side wheel. Attachment 4367Attachment 4368
OMG i hope you found a passage from the engine bay to interior!!!!! let me know if it works.....
im a little fuzzy on where itis exactly......
for who ask me i post this maybe help for someone
The radio case is 7 inch and all the front is 8 or 7-15/16 inch
Attachment 4381Attachment 4384
Work fine for me... push the plug inside, make hole and put back....Attachment 4390Attachment 4391Attachment 4392