how to remove round vents mica nissan ventilation

Please advise how to remove the round vents on the Mica Nissan (March 2016, Active Model) ventilation above the radio? Thanks.

Attachment 6140

Yours may be different than the Canadian version as ours are more square. They can be removed by taking off the stereo bezel and they clip on to the bezel from the back.

Quote:

---

Originally Posted by Ajijic

Please advise how to remove the round vents on the Mica Nissan ventilation above the radio? Thanks.

---

You would need to take a photo of your dash and provide the year of your vehicle in order for anyone to be able to help you. As Richard indicated, the Micra sold in Canada does not have rounded centre vents, but rather rectangular. Without the model year and/or a picture of the centre vents, its hard to provide any sound advice.

Quote:

---

Originally Posted by JOEMAMA

You would need to take a photo of your dash and provide the year of your vehicle in order for anyone to be able to help you. As Richard indicated, the Micra sold in Canada does not have rounded centre vents, but rather rectangular. Without the model year and/or a picture of the centre vents, its hard to provide any sound advice.

---

Thank you for the input. Please note the revised post above. Thank you.

Attachment 6141

You basically get your fingers between the dash panel and the bezel that houses the vents and then pull towards you. There are 11 metal clips. It looks like they recommend starting at the bottom and move to the top. Becareful because there will be a wire connected to the hazards switch so don't pull too hard. It should take 30 seconds to remove.