My drivers side mirror got torn off and broke the 3 plastic metal studs that bolt onto the frame. Has anyone had any luck with any epoxies that would be able to fasten the plastic bases to the mirror?
TIA
My drivers side mirror got torn off and broke the 3 plastic metal studs that bolt onto the frame. Has anyone had any luck with any epoxies that would be able to fasten the plastic bases to the mirror?
TIA
__________________________________________
View my fuel log 2016 Micra Active manual: 6.0 L/100 km ... 46.9 mpg (Imp) ... 16.6 km/L ... 39.0 mpg (US) ...
"Plastic metal?"
Photo?
If it's what I think it is, you should be able to make "forms" with tape or something, pour epoxy to recreate the standoffs and then drill out the hole for the mounting screws.
__________________________________________
View my fuel log 2015 Micra S manual: 5.0 L/100 km ... 56.5 mpg (Imp) ... 20.0 km/L ... 47.0 mpg (US) ...
https://www.jbweld.com/products/plastic-bonder-syringe
Found this may actually work....
__________________________________________
View my fuel log 2016 Micra Active manual: 6.0 L/100 km ... 46.9 mpg (Imp) ... 16.6 km/L ... 39.0 mpg (US) ...
Worth a try for sure.
__________________________________________
View my fuel log 2015 Micra S manual: 5.0 L/100 km ... 56.5 mpg (Imp) ... 20.0 km/L ... 47.0 mpg (US) ...
So far so good...
__________________________________________
View my fuel log 2016 Micra Active manual: 6.0 L/100 km ... 46.9 mpg (Imp) ... 16.6 km/L ... 39.0 mpg (US) ...
its a well known brand, as usual surface preparation is probably very important
2015 Micra S (manual)
no A/C /no power options/ block heater/4x 2 Ohm speakers...all factory stock in 2015
Feb 2015 build
9,999 purchase price + tax..no additional 1600$ because it was a 2015 purchased in 2016
so receipt says $8,399....+1600 .... so they look good i guess...for a brand new car!