Thanks Atwas. And this ScanGauge monitor connects to the ODB-II port?
Thanks Atwas. And this ScanGauge monitor connects to the ODB-II port?
__________________________________________
View my fuel log 2015 Micra S manual: 7.7 L/100 km ... 36.6 mpg (Imp) ... 13.0 km/L ... 30.5 mpg (US) ...
What's the size of the speakers, 6.5" round? Do all speaker sets come with some sort of mounting brackets to adapt to factory ones? Can 10" fit in the doors?
__________________________________________
View my fuel log 2015 Micra S manual: 7.7 L/100 km ... 36.6 mpg (Imp) ... 13.0 km/L ... 30.5 mpg (US) ...
Hello lbarouf:
The speaker size is 6.5" the speaker model I used is "Pioneer speakers model TS-G1722i" and yes they came with speaker mounting adapters. I don't believe there is room for 10" speakers without some serious modifications to the door panels. As for the Scanguage is does connect to the ODBII port.
lbarouf (04-08-2015)
Just upgraded the speakers to Pioneer 4-way speakers. The factory speakers are only 2 ohm impedance though (usual for car speakers is 4). So this means without upgrading the head unit or adding in an amplifier, new speakers are going to lose the "punch" but I am glad to have more clarity at higher volumes.
I just bought the same speakers as you ptbo micra. I can't wait to hear them in the car! Are you satisfied with yours?
Also, is there some kind of speaker harness available (like this) or do I need to cut the oem connector?
I cut the connector, so far I am very satisfied
Get your MICRA-FORUM.com decal HERE!!
Micra Meets: Loyalist Pkwy '15, '16 | Classique d'automne '15 '16 '17 '18 | Forks of the Credit '16 | Mosport '16 '17 '18
Also, in the front, you will need to space the speakers inboard by about 1/8" to 1/4" so they will not foul on the windows when they go down.
Get your MICRA-FORUM.com decal HERE!!
Micra Meets: Loyalist Pkwy '15, '16 | Classique d'automne '15 '16 '17 '18 | Forks of the Credit '16 | Mosport '16 '17 '18
I ordered the merta 70-7552 harness.
Ptbo do you have the colour chart for the wires?
I have and older deck with te older colour code.
I think this is whats going on.
Factory:
Thick yellow 12+ constant
Blk 12+ acc
Orange illumination
Blue antenna
Pink dimmer
Black separate ground
Speakers:
Red / yellow
White / blue
Pink / purple
Gray / orange
Deck Iso:
Blue annt
Red acc 12
Thick yellow const12
Orange illumination
Black ground.
Speaker solid + blk -
2xgrey
2xwhite
2x green
2x purple
__________________________________________
View my fuel log 2015 Micra S manual: 7.7 L/100 km ... 36.8 mpg (Imp) ... 13.0 km/L ... 30.6 mpg (US) ...
for the speakers I just used the 9V battery technique to find out the polarity of the factory speakers and went from there.
Get your MICRA-FORUM.com decal HERE!!
Micra Meets: Loyalist Pkwy '15, '16 | Classique d'automne '15 '16 '17 '18 | Forks of the Credit '16 | Mosport '16 '17 '18
So i guess when its the proper polarity is makes sound.
I guess the rest is multimeter and process of elimination.
I KNOW the thick yellow is the constant 12v
Orange and blue are usually illumination and anntenna respectively.
The pink is throwing me. So are the 2 black wires. One on the main harness and one by itself on a seperate clip.
I think the one on the seperate clip is the ground. Not that it matters ill make my own ground.
So is pink acc 12v? - multimeter will tell.
Is is a dimmer? Are all the blacks grounds? I guess ill find out.
__________________________________________
View my fuel log 2015 Micra S manual: 7.7 L/100 km ... 36.8 mpg (Imp) ... 13.0 km/L ... 30.6 mpg (US) ...