Replacing Front left side (passenger Headlamp)

[Don3030]

I damaged the front left passenger side headlight.( I drive in Europe on left side.)
One of the mountings has broken and I need to remove the lamp and replace it.
I cannot find anything to help me out on how to do this.
Does anyone know if there is a body manual to carry this work out.
cheers Don3030

[MrMicra2015]

i think i remember someone FIXING the tab, or thinking about it because the top one broke.

Remove front bumper fascia. Refer to EXT-14, "Removal and Installation".
2. Remove the headlamp mounting bolts.
3. Pull out the headlamp assembly forward the vehicle.
4. Disconnect the connectors, and then remove headlamp assembly.


it looks like a buncha work,id glue

manuals on internets ,nissan versa similar

[Don3030]

Hi is there a visual step by step guide to do this

[MrMicra2015]

Hi is there a visual step by step guide to do this

sort of but i think this manuals one Gen behind i had this bookmarked but
DOWNLOAD AT OWN RISK
DOWNLOAD AT OWN RISK
DOWNLOAD AT OWN RISK
https://zinref.ru/avtomobili/Nissan/...NGLISH/000.htm

i think i can condense the manual
-remove front bumper cover removing the 20 screws visible and the 10 it will take 1 hour to find
-remove 4 screws securing headlight
-installation reverse of removal





REMOVAL
CAUTION:
Bumper fascia is made of resin. Never apply strong force to it, and be careful to prevent contact with
oil.
1. Bumper reinforcement 2. Bumper energy absorber 3. Bumper reinforcement lower
4. Front grille 5. Front fog lamp bracket RH 6. Bumper side bracket RH
7. Grommet 8. Bumper fascia assembly 9. Bumper bracket cover
10. Spring nut 11. Front fog lamp bracket LH 12. Bumper side bracket LH
JMKIA5384ZZ
EXT-12
< REMOVAL AND INSTALLATION >
FRONT BUMPER
1. Fully open hood assembly.
2. Remove fender protector fixing clips and screws to access bumper fascia assembly fixing screw, and then
remove bumper fascia assembly fixing screws (LH/RH).
3. Remove bumper fascia assembly lower side fixing clips.
4. Pull bumper fascia assembly side toward the vehicle side as
shown by the arrows in the figure, and then disengage bumper
fascia assembly from bumper side brackets (LH/RH).
CAUTION:
When removing bumper fascia, 2 workers are required so
as to prevent it from dropping.
5. Disconnect front fog lamp harness connectors (LH/RH).
6. Remove bumper fascia assembly.
CAUTION:
When removing bumper fascia, 2 workers are required so as to prevent it from dropping.
7. Remove the following parts after removing bumper fascia.
• License plate bracket
• Front bumper side brackets (LH/RH)
• Fog lamps (LH/RH). Refer to XX-XX, "*****".
• Front grille
8. Remove bumper energy absorber.
9. Remove mounting nuts, and then bumper reinforcement.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
NOTE:
After installing, perform fitting adjustment.