Results 1 to 2 of 2

Thread: Bigger Throttle Body (MR20DE)

  1. #1
    Senior Member
    Join Date
    Sep 2016
    Location
    Yukon
    Posts
    138
    Thanks
    0
    Thanked 31 Times in 23 Posts

    Bigger Throttle Body (MR20DE)

    It appears the MR20DE throttle body is of near identical design to the HR16DE and 10mm larger. They can be found for roughly 85$ used online. The Japanese forums and performance shops all use larger throttle bodies in their tunes. I believe they use a mix of a bored out stock one and the MR20DE.

    Since I'm still trying to fine tune my intake and have confirmed through testing and logging that the ecu has accurately compensated for the increased flow (not running lean), I'm considering adding in the larger throttle body and increasing the intake size to be more uniform behind the air filter (4" in/out). Right now I'm down stepping from 4" to 2.5" OD. I'm just not sure how worth it it would be with the stock diameter MAF housing in there.

    Anyone else look into or attempt a throttle body upgrade?



  2. #2
    Senior Member Nobuseri's Avatar
    Join Date
    May 2016
    Location
    Montreal, Quebec
    Posts
    129
    Thanks
    8
    Thanked 51 Times in 35 Posts
    Quite expensive full tune up package from Mine's Motor Sports.
    http://www.mines-wave.com/JP/CATALOG...SMO_S_K13.html
    This gives you an idea that perhaps, throttle body isn't enough, it's a combination of ECU tuning and those intake upgrades. Your best bet is to get Uprev's Osiris standard program to make you a custom cable for about 500$ and get a local Uprev tuner to change a few settings, similar to the pre-tuned Mine's ECU which is a stock casing with their badge on it, pre made for the HR15DE.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •