Originally Posted by
Nobuseri
Is Autech assembling/manufacturing some of the components on the Nismo Sentra? I ask you first before I do my own research.
From what I've read, the only thing that "nismo" about it are as follows ;
Badge
Body trim
Rims 18x8
Optional ( free ) Bridgestone potenza RE71-R 215/45R18
Some sort for suspension bits ( lowered 0.4" all around )
Steering wheel
Front seats upgrade
Carbon trim around the shifter.
That's it
No tuning (188hp170ft-lbs)
Unknown if there's an exhaust
But the model I'm after has 6 gears and a lsd
I don't care about tuning as the mr16ddt is very capable of 21psi and more and over 240whp around 290 crank horsepower. I can always get it tuned myself.
You can even see some with 360hp but I'm sure that pushing the boundaries of reliability
I'm going to be setting the boost a tick higher then stock and which could be 10 - 17 psi
I hoping it's stock at 10 cause then 14-17psi is completely within factory spec "technically"
And probably Intake and exhaust as per usual but I will widen the pipe from maf to t/b and lengthen the distance maf
To t/b.
This allows for more measured clean air ready to be gulped at a moments notice. Resulting in better response and
So looking at the pics there does seem to be some kind of tip at least maybe even an exhaust.
I really want to just leave it sleeper. As sleeper as a nismo can be
Last edited by IMPUL; 05-26-2017 at 07:43 PM.
__________________________________________
View my fuel log 2015 Micra S manual: 7.7 L/100 km ... 36.8 mpg (Imp) ... 13.0 km/L ... 30.6 mpg (US) ...