Putting back the spring in, noticed that there's this little tail... should point that way..
Then you put this piece with 3 bumps on the other end of the spring. also make sure that the bump in the middle is facing that way..
Put the key on the piece with the 3 bumps.
Now this is the important part.. i screwed up my spring by turning it in the wrong way.
Place the cover piece on the key like in the picture. but don't close it..
GENTLY Turn ONLY the cover piece clock wise TWICE. (you will notice that the key will turn along when you turn the cover piece)
Then close the cover piece.
Try pressing the chromed button, to see if the key comes out properly smoothly.
use the screw to secure the fob, and put the nissan logo on.
Make sure you don't put the Nissan logo reversed.
Time to take the key to Canadian tire for a cut!!! remember, go on a less busy day!!
TADA!!!