A few more little pieces...
A few more little pieces...
__________________________________________
View my fuel log 2015 Micra S manual: 7.7 L/100 km ... 36.8 mpg (Imp) ... 13.0 km/L ... 30.6 mpg (US) ...
Nice!
What else are you waiting on?
Nismo long hub bolts are ready to be shipped but haven't left japan yet. from rhdjapan.com
Spacers off ebay are en route but no tracking info. Just between 7-13th.
The union fitting from mississauga should be here tmw.
Everything else is here, Fluid, bleeding kit, etc.
I need to pick up some nuts so I can use them to remove and replace the hub bolts.
Total cost so far inclusive of fluid nuts and stuff $1000
It could be done cheaper tho.
Last edited by IMPUL; 01-12-2016 at 05:10 PM.
__________________________________________
View my fuel log 2015 Micra S manual: 7.7 L/100 km ... 36.8 mpg (Imp) ... 13.0 km/L ... 30.6 mpg (US) ...
Daox (01-14-2016),ptbo micra (01-12-2016)
Eeeerrccks... Union bolt is a fail. But found out I need # 46246-33P10 + 46245-33P10 front brake tube assembly $12 USD Ea. Plus $30 shipping <FAIL> now sourcing local part.
Just found out the 240z>300zx brake line conversion has the correct fitting.
http://www.enjukuracing.com/products...z32-front.html
Last edited by IMPUL; 01-13-2016 at 08:50 PM.
__________________________________________
View my fuel log 2015 Micra S manual: 7.7 L/100 km ... 36.8 mpg (Imp) ... 13.0 km/L ... 30.6 mpg (US) ...
Okay so .... I need a 5mm space behind the rotor ( right on the hub)
And a 25mm adapter spacer to clear the caliper. ( man is it big. )
Ordered parts.
July I will install this and make a new thread for the install.
But from my test fit there are lots of positives.
Dust cover behind the rotor doesn't seem like it interferes .. So far ..
Bolts and everything seems to line up.
Looks awesome.. And now it forces me to poke my wheels out an inch or so.
What a great excuses to lower it more and buy even wider tires .. Time to roll the fender
I'm gonna use the 10mm spacers I already have on the rear . 2 things originally purchased with intent to use on the front have been donated to the rear now ... Lol.
__________________________________________
View my fuel log 2015 Micra S manual: 7.7 L/100 km ... 36.8 mpg (Imp) ... 13.0 km/L ... 30.6 mpg (US) ...
Looks great!
I think the long term solution ( and cert legal ) would be a 5mm spacer between the caliper and the bracket with studs 4-5mm longer.
My package of 5mm spacers for the hub may be delayed in the postal strike. Can anyone help me make a 5mm think bracket spacer for the front caliper bracket by Friday? I want to be ready for micra cup.
__________________________________________
View my fuel log 2015 Micra S manual: 7.7 L/100 km ... 36.8 mpg (Imp) ... 13.0 km/L ... 30.6 mpg (US) ...
So I actually have some cutoffs that will work.
I need it to be cut down and drilled. I'll see what I can get done at work tmw.
Specs:
4-5 mm thick
27or so mm diameter
12mm hole in centre
I need to find longer bolts now.
__________________________________________
View my fuel log 2015 Micra S manual: 7.7 L/100 km ... 36.8 mpg (Imp) ... 13.0 km/L ... 30.6 mpg (US) ...
Basically just make a thick washer outta this
__________________________________________
View my fuel log 2015 Micra S manual: 7.7 L/100 km ... 36.8 mpg (Imp) ... 13.0 km/L ... 30.6 mpg (US) ...
This is what I need 27mmx5mm 12mm hole
http://m.ebay.com/itm/Brake-Spacers-...940?nav=SEARCH
__________________________________________
View my fuel log 2015 Micra S manual: 7.7 L/100 km ... 36.8 mpg (Imp) ... 13.0 km/L ... 30.6 mpg (US) ...