Honestly you only really need 3 tools to get the oil done on these cars. A wrench/socket set for the plug, a tool to get the oil filter off (I use oil filter pliers), and something to catch the oil...
Type: Posts; User: 4Aaron GE
Honestly you only really need 3 tools to get the oil done on these cars. A wrench/socket set for the plug, a tool to get the oil filter off (I use oil filter pliers), and something to catch the oil...
OK, info dump time guys. I can't verify the accuracy of the numbers, but here's what I've got so far:
From
https://i.imgur.com/wJZ8HzK.png
43042-3AW1A
Spindle
I only get the one...
Have you checked the underbody for any sort of damage?
I think it might be a time thing. Once, I forgot to turn them off when I went to work. I could feel that sinking feeling when I came back and realized what I had done. Car started up without any...
I would also like to know!
Definitely don't do that. It's a good way to destroy your battery if you drain it too far.
What year is your car? I'm not familiar with the UK cars, but it appears that it spanned both the early cars, and the facelifted cars. Due to the shape of the headlights and fenders, you'll have to...
I picked up some 15 inch alloys for the winter, so I won't be needing these. 3 of them are in good shape, and the 4th is dented, but is otherwise fine (see last picture). Tires are probably okay...
Once you factor in shipping, I find NAPA to be pretty competitive when it comes to consumables like oil filters, etc. However, if they ship from the same warehouse as the bigger parts in an order,...
If you're unable to source an original file, let me know. I can help out in that regard.
So I picked up these tires at the beginning of winter, but never ended up buying wheels for em. OEM size for the SR wheels. Asking 250 obo for the set. Pickup in Woodstock, Ontario.
...
The front is the middle of the crossmember that the lower control arms bolt to. On the rear, you're looking at a tow hook that's towards the left side of the car.
The original wheels are 15x5.5 offset 50. The 42 will pull the wheels out 14mm at each corner. The 40 offset ones will pull the wheels out another 2mm out from there. It's a minimal difference,...
IIRC, it's held in by like, a single 10mm bolt. So it's pretty straightforward once you get the wheel off. However, the bigger issue is whether or not it has been rusted in place. When I had to do...
I don't think any of us know what the low beam thing means. Could be the grade/angle that the beam is aimed out of the housing.
When they're talking about DIY, they're referring to fixing the...
The strut and lower control arm seem to be common between the Versa and the Micra. However, I don't think the springs are shared. Likely, the Versa springs will be a higher spring rate to...
Ah, so that is a thing with diesels then? The DCi engine is diesel, so that's probably what we're looking at.
https://www.qashqaiforums.co.uk/viewtopic.php?t=7899
A guy on that forum seems...
That's really not a thing we have experience with. All but a few of us have cars that use the HR16DE petrol engine.
If you bought the correct injector, the specifications shouldn't have changed,...
You'll definitely want a half inch torque wrench as well as the appropriate sockets.
You're in luck. A suitable torque wrench is on sale right now at Princess Auto for ridiculously cheap. ...
https://www.homedepot.ca/product/m-d-building-products-2-inch-x-9-ft-premium-rubber-weather-seal-replacement-garage-door-bottom-black/1001120751
People used to use stuff like this a lot if you...
Make sure you clean out the area inside the fender where the door closes. Leaves and snow like to accumulate in there and freeze, which can keep the door from opening fully.
OK, so the width and offset of those wheels will push them outwards quite a bit. It shouldn't be too much of an issue though. I'm on 16x7j with +40 offset, and it's a pretty aggressive fitment, but...
Is there anything regarding the offset? It may be stamped in there as ET### or look for a number stamped in there that's between like +35 and +55
The rear spoilers are usually available on like ebay or aliexpress. They're typically about 100-150 bucks depending on where you look.
https://forums.autosport.com/topic/221056-how-to-post-images/
Here you go, this seems pretty comprehensive.
You should be able to get the number 4 spark plug out without removing the manifold to get an idea of what kind of condition they're in. IIRC, you'll need some pliers to get some hose clamps and...