Please do, the ones I used were not bolt on..
Type: Posts; User: IMPUL
Please do, the ones I used were not bolt on..
So here's where it stands ..
I have *fingers crossed* all the pieces I need.
I even have the fender roller.
I still need a heat gun. So I don't bugger up the paint.
I need time.
The fender...
Loading .... 89% complete
I have some options for bolts from carlson. Just need to figure out the current length of the mounting bolts.
I have a feeling they are 35mm +/- so the bolts for a versa pn "H821" which are 43.25mm...
This is what I need 27mmx5mm 12mm hole
http://m.ebay.com/itm/Brake-Spacers-Caliper-Conversion-Washers-Suit-Nissin-Brembo-Bendix-20mmx10mm-/231970469940?nav=SEARCH
Basically just make a thick washer outta this
So I actually have some cutoffs that will work.
I need it to be cut down and drilled. I'll see what I can get done at work tmw.
Specs:
4-5 mm thick
27or so mm diameter
12mm hole in centre
...
I think the long term solution ( and cert legal ) would be a 5mm spacer between the caliper and the bracket with studs 4-5mm longer.
My package of 5mm spacers for the hub may be delayed in the...
Okay so .... I need a 5mm space behind the rotor ( right on the hub)
And a 25mm adapter spacer to clear the caliper. ( man is it big. )
Ordered parts.
July I will install this and make a new...
Eeeerrccks... Union bolt is a fail. But found out I need # 46246-33P10 + 46245-33P10 front brake tube assembly $12 USD Ea. Plus $30 shipping <FAIL> now sourcing local part.
Just found out the...
Nismo long hub bolts are ready to be shipped but haven't left japan yet. from rhdjapan.com
Spacers off ebay are en route but no tracking info. Just between 7-13th.
The union fitting from...
A few more little pieces...
I found out the hard way that most if not all 300zx front brake lines come with female ends.
One is suppose to be male for the caliper.
This can be rectified by built your own HEL brake lines ...
*shoulda had a v-8*
Hel make your own brake line.
http://www.brake-lines.co.uk/create
I just found out that k12 rear drums are 203mmx38mm vs k13 180mmx26mm
A combination of premium shoes, larger drum and width/length of shoe and rear braided line and possibly venting the drum should...
So it seem that the micra and 300zx may both have m10x1.0 fitting. So these brake lines should be a direct fit.
http://www.rockauto.com/catalog/moreinfo.php?pk=5010696&cc=1209697&jnid=468&jpid=11...
So I received my calipers. They are new replica aftermarket OEM spec calipers that are exactly like sumitomo calipers minus the Nissan/sumitomo branding. +/- ... + less then half price, - made in...
I haven't been able to find an "off the shelf" rotor yet.
Mini Cooper is close but even thinner then clio.
Ferodo blanks were gunna cost $170+ with shipping. But there only $75 and no one has them...
http://importnut.net/300zxbrakeswap.htm#frontbrake
You want the aluminum 1991-1992.5 30mm calipers with the rear pots centered. ...
When you have it all installed and working plz include which part numbers you used. There are quiet a few bits here now.
Calipers - z32 ( which ones exactly )
1990- $120-$200...
Mods: can we split this thread at post #11 into a new thread since this is way off topic , and sorry for that. Lol
You need 60mm ones not 50mm
The stock is apparently 41mm front 39mm rear.
So 50mm is not really worth it.
19mm gain is, IMO.
Front-
...
Sorry.
These should be specific to our model. Need to double check tho.
Front
40222rs030
14.3mm/50mmx8
6,500¥
40222rs040
14.3mm/60mmx8
6,700¥
http://www.thenismoshop.com/NISMO-EXTENDED-LONG-HUB-BOLTS-WHEEL-STUDS--Nissan-350Z-Z33-G35-V35_p_203.html
Now off to work, ill search more tonight
http://vi.raptor.ebaydesc.com/ws/eBayISAPI.dll?ViewItemDescV4&item=130679059756&category=33562&pm=1&ds=0&t=1441323701696
Goodridge? Versa brake lines?...