SR20VET swap... (looking at turbocharged 2.0L from X-trail into Micra)

So I think I figured out my engine swap.

Sr20vet from x-trail.
B86mmxS86mm
9:1 cr
10psi tapering off to 6psi ( wg / ecu controlled )
276hp227tq stock

Garrett gt2560r turbo stock

Turned up to 15psi-17psi
320bhp > 266whp
260tq > 216wtq

2.2-2.4pr @30-32lb/min


0-60 (100) : 5.4
0-100 (160) : 9.1
400m: 13.5 @ 118 (188km/h)

RS6F51H trans from 2003-2005 maxima

P12 bellhousing from g20

1st - 3.153
2nd- 1.944
3rd - 1.392
4th - 1.055 - 100/ 3,800rpm
5th - 0.809 - 80/ 2,400rpm100/2,800
6th - 0.630 - 120/2,800rpm
Rv - 3.002
FD - 4.133

3.27kg/hp weight to power

Vs skyline
276hp ER34 gtt > 5.34kg/hp
450hp ER34 gtt > 3.27kg/hp
580hp R35 gtr > 3.07kg/hp


I still need to figure out the axles and clutch
Pedals ( cable vs elec. )
Ecu ( probably aem ems-4)
Custom wiring harness. And some other things ...
A/c delete - p/s delete - etc

Stage 2 will be either

Gt2871r -4
350-400hp
2.5-2.85 pr 35-40lbs/min 20-26psi

Gt3076r
450hp
3.25pr 45lbs/min 31.5psi

But first I gotta get it in and running .. I may even be happy with only 320hp lol

Going to look at an engine on Saturday and talking to a wrecker in QC about the trans..

Do you think it will fit? Will the rad have to be moved?

They have fitted a sr16ve+t , an sr20de so I don't see why not since they all share the same size block.
Ya I'll probably use a short rad and run the inter cooler and rad side by side.
Run twin thin electric fans then I can cool the inter cooler while stopped. May also use a sprayer.
I want to run an oil cooler and transmission cooler so I wanna set it up to look nice .

So you're making actual plans for this?

Quote:

---

Originally Posted by IMPUL

They have fitted a sr16ve+t , an sr20de so I don't see why not since they all share the same size block.
Ya I'll probably use a short rad and run the inter cooler and rad side by side.
Run twin thin electric fans then I can cool the inter cooler while stopped. May also use a sprayer.
I want to run an oil cooler and transmission cooler so I wanna set it up to look nice .

---

Impul, is this going to be your daily driver? It is bound to turn some heads. Good luck!

Sounds like buckets of fun. Lets see you start buying parts. :)

I'm not taking the trans, p/s, a/c, ecu, exhaust down pipe, just the engine, alt, turbo, maybe I/C.
Laying a deposit and picking up in dec.

The last pic is a non turbo .. You can see it not that large of an engine.

Quote:

---

Originally Posted by bigblue

Impul, is this going to be your daily driver? It is bound to turn some heads. Good luck!

---

I'm actually going to go sleeper mode with this build.

Like even remove the roof racks, stickers. Use stock steelies with caps.
The lsd and gearing should keep wheel spin under control.

Attachment 3226 thailand march

I will be continuing this project. It will take time.
And a second car. As this will likely be off the road for sometime going the swap.
The first 2 pieces will be the engine and the ecu.
An ecu I can use now and then.
I will update as parts are acquired and problems over come.