Fast Wheels Shibuya. 16x7. 205/50r16
4948
4949
4950
Fast Wheels Shibuya. 16x7. 205/50r16
4948
4949
4950
Never use this hose tube.. way too cheap (squeeze) 4867
PCV, and now clean but first time i can see oil on it and inside the little hose 4868
You can see intake plug after 7000-8000 km look...
the rectangular box is the crossover for speaker and tweeter.
the nissan speaker is 1 1/4 height so i use the two layer of (mdf 5/8).
i use stock speaker for bottom piece (all 4 is the same)...
45144515451645174518
Phase 1: custom speaker mount/speaker/crossover/tweeter INSTALL. play on radio not amp. DONE
phase 2 : have to pass wire, (amp to crossover) next time
i just go to a shop who solder aluminium, it cost 25$ and i'm sure don't break...
Aluminium hard to solder, need tig and (hight voltage and impulse if i remember he told me...)
and i remove 3in...
I just cut/turn to right angle my Injen and go solder it to stop rubbing on my hood. Now no rub and fit perfectly. 1=where i cut and overlap, 2= instal and paint, 3 stock Injen442044214422
- raised your car, remove the wheel (front driver), in front of the shock (top-right) by 6-8 inch here the cable and hole...
- in front of shock, the cable go in plastic fender. I fish here to where...
Work fine for me... push the plug inside, make hole and put back....439043914392
for who ask me i post this maybe help for someone
The radio case is 7 inch and all the front is 8 or 7-15/16 inch
43814384
i find this plug right to hood cable(inside). outside it located in inner top plastic of the driver side wheel. 43674368
new Updates:
-APPS2Car Parking Brake Bypass Video
-Metra 70-7552 Radio Wiring Harness For Nissan 2007-Up
-Metra AX-NISUSB-2 USB Retention Harness 10-Up = Nissan FOR KEEP STOCK USB PORT...
it's 4 crossovers lol
More to come..
Only raised rear by 3 3/8 inch.
Maid with 5/8 mdf so not too heavy. (36x21) 21 have too trim one place but really tight. probably better 20, 20 1/2 but have too fix it on...